Spinning Reel Parts – Find the Right Replacement Part for Your Reel

When learning to catch a fish, it is essential to know about the parts of a spinning reel. Beginners tend to prefer spinning reels.

This reel is commonly called the open-face reel. Because it is easier to use than -bait-casting reels, the risk of loss is less.

Anglers use the spinning reels who want to enjoy light lines and greed. Bass fishing relies heavily on spinning reels.

Parts of a spinning reel

They are responsible for being a large part of the fishing setup, storing the line, and ensuring the cast. Makes an excellent reel angle more pleasant, smooth, and accurate.

A fishing reel and gear familiarity are essential for free fishing. Let’s check out the fishing reel parts and learn what they are used for (describe each part).

A spinning reel consists of several significant parts and components. Your understanding will hopefully be strengthened and improved.

Parts of a spinning reel

Reel Body

part of spinning reel

The reel body or residence is the main component of a fishing reel. Most spinning reels connect the body with a support arm, one-foot stick, and gearbox housing.

Graphite or aluminium are the most common materials used for reel bodies. But it is a heavy reel, so it is unlikely to be kept in saltwater conditions.

The corrosion-resistant properties of graphite make it a good choice for saltwater fishing reels.



One of the essential parts of fishing is the reel handle. Since the handle is handled after making a cast to return to the stick, its handle is smooth and comfortable.

Most reel handles are round or T-bar and can be run by the right or left hand. It can stand all seasons for dedicated handle-bass anglers and spool with the least effort.

Some handles contain rubber grip but are mainly designed with graphite, aluminium, or other metal, which are best to withstand pressure and torsion.

Spinner reels can also be equipped with anti-reverse levers, preventing the handle from moving while the fish draws on the spool and removes more lines.



The spool is also essential in casting distance and quickly with a fishing line. Anodized aluminium or graphite spools are usually made from graphite (graphite is lighter, but aluminium is more powerful).

Reels hold their lines on their spools, which are in the centre. It is the part that tells you how successful the fish are.

It is especially likely to happen when the spool produces a lot of friction on the line, leading to breakdowns. Spools are usually graphite or aluminium; a spool protects the line.



The reel frame is its main component and focal point that keeps all features together. Most spinning reels body, support arms, toe and gearbox housing.

Bass anglers usually choose graphite, aluminium, or plastic frames with more robust metal physical reels because these bodies are more durable over time.

Although there is a rust problem, metal-made reels are more durable than plastic ones. The spinning reel bodies are different in shape, size, and synthesis.

Line Roller

Line Roller

The line is a part of the roller reel and guides the bar on your spool. The friction coefficient on better reels is usually low when a smooth, highly polished bush is used.

Line rollers with no catches are best. Nothing is better than a line roller with effect, but they usually come with a higher price tag.

Drag Adjustment knob

Drag Adjustment knob

A common feature of the spinning reel spool includes a drag adjustment knob. The drag adjustment is found in the upper part of the spool, like a knob dial.

Identify the line-breaking power and determine the drag. Drag adjustment is essential for spinning reels.

It is a button or setting that can be suppressed by the finger, which increases or reduces the amount of angler friction.

Or drag the line. This feature is significant in bass fishing, where the fish pulls the line back into the water while fighting.

The drag system combines metal washers that can vary independent numbers. You often have to make sense of the stick and reel before you adjust the drag.

Anglers can find and use the drag adjustment knob easily. On spinning reels, the knob is usually set up near the reel handle to make knobs able to recover while casting.

The line-breaking power determines how the knob should be set the knob. Generally, the dragline breaking strength should be one-quarter.

Side plate

The side plate mainly acts as an access point for cleaning and grease and can access gears for maintenance and repair. They also have great importance in the features of spinning reels.



Spinner reels have bails that act as gates for lines on the spool. When the bail is engaged, the bait prevents the fishing line from unwinding from the spool. Bails release the line of the spool during casting. Bails guide the fishing line back onto reel spools during line retrieval.



Rotor spinning is part of the reel. The rotor handle turns and rotates.

A rotor is often built from graphite. Manufacturers keep it very tight to lift more weight from the rotor.

Light rotor, crank lighter to succeed. Find strength, hardness, and lightweight, high-tech carbon or mixing metals. Rotors are connected to bail arms.

Anti-Reverse Switch

Anti-Reverse Switch

Anti-reverse switch on spinning reel features to prevent the drag from turning backwards.

When the line is off, anti-reverse allows the line to reel in reverse rather than relying on the drag system to maintain tension.

It can work effectively for light fish, but most Anglers use a drag system.

Foot seat

Foot seat

The reel body should be tightly fit to help with the stress of both components and stable and recover fish during the fast action of the cast.

Standard reel feet are rectangular to fit the stick placement. The material is usually graphite or aluminium and is used to expand the reel body.

Despite the quality being mostly guaranteed to fit the rod frame, the actual fit is sometimes a concern.

Internal parts of a spinning reel


Your cranking is the source of powerIt turns the gears that twist the rotor panel gear when you turn the handle.

The gears are set at a certain speed or proportion. For example, A gear ratio of 5.2: 1 means that the rotor will turn 5.2 times for each turn of the handle.

The balance can be 3 and 7 or faster. Cast and machined metals are used to build gears, of which brass is standard.

And another is stainless steel or a mixture of stainless steel. Brass and stainless are lightweight, still strong machine gears.


I have made you aware of all the features of the Spinning Reel; today, with so many spinning reel options available, choosing the best one can be challenging.


What is the knob on top of the spinning reel?

On spinning reels, KNOB is usually set up near the reel handle to make KNOBs able to recover while casting. The line-breaking power determines how the knob should be set.

What is the switch at the bottom of a spinning reel?

 An anti-reverse switch allows the line to reel in reverse rather than relying on its drag system for tension after being off. It can work effectively for light fish, but most Anglers use a drag system.

How do spinning reel gears work?

Your cranking is the source of power. It turns the gears that twist the rotor panel gear when you turn the handle.

What is the fishing reel parts catalogue?

  • Fishing reel parts name
  • Spool
  • Bail Arm
  • Body
  • Side Plate
  • Gears
  • Rotor
  • Drag
  • Handle
  • Anti-Reverse Switch
  • Roller

See the Step-by-Step Guide on How to Spool a Baitcaster Reel on our website.

Leave a Comment